Boat Trailer Leaf Spring Slider Single Axle PAIR For 25 1/4 inch Double Eye Springs - 31 in Fender Bracket

Review(s)(0) Write a Review

Part Number: 27132

by : 27132

Single Axle Leaf Spring Sliders for 25 1/4 Inch Double Eye Springs

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Quantity	Price
1	$161.54
2	$118.86
3	$114.55
4	$110.53
5+	$105.00

Price $161.54

Quantity

In Stock

Description

This set of Single Axle Leaf Spring Sliders is specifically designed to mount 25 1/4 inch Double Eye Leaf Springs to your boat trailer frame, providing a robust and reliable suspension solution. Constructed from heavy-duty, hot-dipped galvanized 2" x 2" steel angle, these sliders offer exceptional corrosion resistance, ideal for freshwater and saltwater marine environments. This pair of sliders features 7-inch wide fender mounting brackets spaced 31 inches apart, perfect for securely installing plastic step fenders, but they also accommodate aluminum, galvanized steel, or various other types of fenders. Ensure optimal performance and correct installation by using 25 1/4 inch Double Eye Leaf Springs, compatible shackles, and 1/2" diameter by 3 1/2" long leaf spring mounting bolts. The sliders come clearly marked with left and right, front and back orientations—remember, the narrower hanger should be positioned towards the rear of your trailer.

Ideal for trailer repairs, upgrades, or replacements, these leaf spring sliders simplify your suspension system installation, providing long-term durability and ease of maintenance. We've included a few notes about different installation options below!

Trailer Bolts - Using 1/2" Diameter Through Bolts is most common on I Beam Trailer frames. You will drill a hole through the Slider, and your Aluminum Frame, and using (2) Bolts per slider, mount to your trailer Frame. ( So 2 Holes per side)

Boat Trailer U-Bolts and U Bolt Mounting Plates - Using 1/2" Diameter U Bolts is common on Square Tubing Frames, C Channel Frames, and even smaller I Beam Frames as it does not require drilling. The Key here is to use (2) U Bolts and (2) Plates per side that have matching widths to work with each other. You will select the Width of U Bolt that will not only be wide enough to go around your frame, but also accommodate the width of the Spring Slider.

Example: A 2" x 3" Rectangular Tubing Frame could use a 3 inch Wide U Bolt and Matching Shackle. As the U Bolt is wider, you would set the U Bolt and Shackle at an angle, securing each side against the frame, and tighten it down.

In the above example, the Length of the U Bolt could be 4 5/16" to accommodate the height of the Frame, thickness of the Spring Slider, and Thickness of the Spring Shackle.

Mounting Hardware for this assembly is available separately, as not all trailers will require the same hardware. Here is a link to our Mounting Hardware Category so you can take a look at all the available options.

Boat Trailer Leaf Spring Slider Single Axle PAIR For 25 1/4 inch Double Eye Springs - 31 in Fender Bracket

Wholesale PRICING:PRICING:

Wholesale PRICING:
PRICING: