Zinc Plated Roller Shaft 9.5 inch long 5/8 inch Diameter

Review(s) (0) Write a Review

Part Number: 23781

by Distributor: N/A

Boat trailer roller Zinc plated 5/8 inch

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Add Ons

(2) 5/8 Pal Nut Caps [$1.12]

$5.99

Quantity

In Stock

Description

This is a Zinc plated replacement roller shaft for your boat trailer. This item will work with a 8” keel roller that has a 5/8” inner diameter. This item has a 9.5” overall length and is 5/8” in diameter.

The purpose of a roller shaft is to allow the keel roller to rotate smoothly to assist the boat while unloading and loading. A rusted or damaged roller shaft could lead to damage or failure of your keel roller. The good news is that replacing this component on your trailer is fairly simple. You will use tools to remove your old pal nuts or cotter pins from the ends of the roller shaft. The shaft should come right out. You can then install your replacement roller shaft by hammering on two new 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts. As stated above, this 9 1/2 inch length shaft would normally mount an 8 inch Keel Roller onto an 8 inch Keel Roller Bracket. It is not uncommon to need to replacement all these parts all at once.

2.5 inch Rubber Roller End Cap with 5/8 inch Inner Bore

Price: $4.99

In Stock

(0)

More Details

5 inch Black Rubber Spool Roller 5/8 Bore for Boat Trailer

Price: $7.99

In Stock

(0)

More Details

12 inch Black Rubber Straight Roller 1/2 inner diameter

Price: $18.99

In Stock

(0)

More Details

4 inch Stoltz V Stop for Winch Post and Bow Protection

Price: $15.99

In Stock

(0)

More Details

Zinc Plated Roller Shaft 9.5 inch long 5/8 inch Diameter

Complete Your Project:

CUSTOMERS ALSO VIEWED