This Hot Dipped Trailer Hub will fit your 6,000-7,000lb Trailer Axle, and comes complete with bearings and seals. We include 2 different seals with this Hub Kit, you will only use the one which fits your axle and the other may be discarded. The 8 Lug Bolt Pattern for This Trailer Hub measures 6.5", which is common for Trailer Hubs and wheels, but it is always good to measure before placing an order for new parts. This Bolt Pattern or Lug Spacing measurement is taken from the Center of any Stud on the hub, to the center of the Stud directly across from it.
This style of hub is known as an Idler hub, because it does not include brakes. It is most commonly used on axles that do not have Brakes, or on axles that you are planning to equip with Slip Over Style Disc Brake Rotors. The Hot Dipper Coating on this Hub is great for Boat Trailers, both fresh and saltwater trailers. The Bearings are included with this hub but they are not pre-greased or pre-installed. The Inner bearing is bearing #25580, which measures 1 3/4" Inner Diameter. The Outer bearing is bearing #14125a which measures 1 1/4" inner diameter. This size Trailer hub is typically used on 6,000lb to 7,000lb Trailer axles.
-Fits 6,000 to 7,000 lb Axles
-Includes bearings and 2 different sized seals
-Outer Bearing Number 14125a 1 1/4 inch inner diameter
-Inner Bearing Number 25580 1 3/4 inch inner diameter
-Bolt pattern is 8 Bolt 6.5"