Trailer Hub Hot Dipped Galvanized 5 Bolt fits 2,000 lb. Axles Hub Only

Part Number: 24674

by : 24674

Hub Only Galvanized Steel 5 Bolt fits 2000 lb. Trailer Axles, 5 on 4 1/2 in Bolt Pattern

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Quantity	Price
1 - 4	$27.92
5	$19.77
6 - 7	$18.93
8 - 9	$18.61
10+	$18.31

Price $27.92

Quantity

In Stock

Description
Measuring Bolt Patterns:

This galvanized trailer hub fits most 2,000 lb trailer axles with straight spindles that fit 1 1/16" x 1 1/16" or 1" x 1" bearing combinations. This listing is for the galvanized hub ONLY if you need new bearings and seals as well you can add on the bearing kit in the "Complete Your Project" section above or purchase them directly here. The hot-dipped galvanized coating on this hub makes it a great choice for boat trailers or jet ski trailers that are used in saltwater or freshwater environments, but it can be used on utility trailers and other land trailers as well. These are the same hubs we sell in our full Galvanized 5 Lug 2,000 lb Hub Kits with Bearings. This Hub can fit either the 1 1/16" Inner Diameter Bearing, Bearing # 44649, or the 1" Inner Diameter Bearing, Bearing # 44643. These Bearings are both typically used in Pairs, on Straight Spindles. Their Outer Diameters are the same, so they both fit this size Hub, but you would want to be sure what size your Trailer Spindle needs before purchasing.

This hub is commonly seen on trailer wheels that are 13 to 15 inches, and the 5 lug on 4 1/2 inch bolt pattern is the standard size for most trailer wheels. These hubs accommodate the standard 1.98 size dust caps that you would see on 5 lug 2000-3500 lb hubs. If you have an EZ lube or Accu-lube greasable zerk fitting on your spindle you would want to consider using a 1.98 Accu-Lube Dust Cap, otherwise, you would likely want to use a Standard 1.98 Trailer Dust Cap or 1.980 Stainless Steel Bearing Buddy for 4 Bolt and 5 Bolt Trailer Hubs. If you are having difficulties getting your dust caps to seat properly, you will also want to consider using one of our 1.98 Dust Cap Installation Tools, as they can make the installation process much easier and straightforward. This 2,000 lb galvanized coated trailer hub is the perfect replacement for boat trailers or any trailer that would benefit from a new corrosion-resistant hub! Keep in mind that this listing is for the galvanized hub only, you will not receive any bearings or seal if you order just the hub, so add on the bearing kit above or purchase the appropriate Bearing Kit (Either the 1" or 1 1/16") on our website here if you need to replace the bearing kit on your hub.

Features

Hot Dipped Galvanized 5 Lug Trailer Hub Only
Fits 2,000 lb axles using either of the standard bearing sets listed below (not included).

Inner & Outer Bearing number 44649 with a 1 1/16" inner diameter
OR
Inner & Outer Bearing number 44643 with a 1" inner diameter
Grease Seal Size measures 1.5" Inner Diameter

Bolt pattern is 5 on 4.5
Rated to 1100 lbs each
Fits 1.98" Dust Caps and Bearing Buddies

Lucas Marine Grease For Boat Trailers	Lucas Red N Tacky For Boat and Utility Trailers
Click Image	Click Image

Trailer Hub Hot Dipped Galvanized 5 Bolt fits 2,000 lb. Axles Hub Only

Wholesale PRICING:PRICING:

Wholesale PRICING:
PRICING: