Trailer Brake Drum Hub 8,000lb Oil Hub 9/16" Lug Stud 8 on 6.5 Bolt Pattern Drum Hub Only

Review(s)(0) Write a Review

Part Number: 27186

by : 27186

8,000 lb Capacity 8 Bolt Brake Drum Hub for Oil Bath Caps with 9/16" Studs Hub ONLY

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Quantity	Price
1 - 4	$208.50
5	$153.41
6 - 7	$147.85
8 - 9	$142.66
10+	$135.53

Price $208.50

Retail Price:$208.50

Quantity

In Stock

Description
Measuring Bolt Patterns:

This is a heavy duty trailer Brake Drum Hub for 8,000 lb capacity trailer axles, features pre-pressed and installed 9/16 inch wheel studs and a threaded front bore for use with trailer oil caps. The drum hub fits onto 1 1/4 inch by 1 3/4 inch trailer spindles, and uses the standard 8k trailer bearing combination (1 3/4" ID Inner Bearing #25580, and 1 1/4" ID Outer Bearing #02420). This 12 1/4 inch by 3 3/8 inch Drum hub has an 8 on 6.5" bolt pattern, which is common for 8 Lug Trailer Hubs and wheels, but it's best to double check your trailer wheel or hub bolt spacing to make sure this is the hub you need. You can measure the bolt spacing on an 8 lug hub by measuring Center-to-Center on 2 studs directly across from one another. This drum hub will most commonly use a 3.376" outer diameter grease seal usually with a 2.25" inner diameter. The front bore of the hub is threaded for use with trailer oil bath caps with 2 7/8"-12 diameter and thread pitch, such as the 21-35 or 8001 Oil Cap from Dexter, Lippert, Kodiak, or other manufacturers. We have a Sealed Plug Trailer Oil Cap for 8,000 lb Hubs and Drums available if you wanted to add on a replacement to go with the drum hub!

Since this listing is just the drum hub you will not receive any additional components, so you can purchase the bearings and Unitized Oil Seal 2.250" ID x 3.376" OD separately or order the full Trailer Wheel Bearing Hub Kit for 02475 x 25580 (1 1/4" by 1 3/4") Oil Bath Style 8,000lb 8 Bolt Hubs. The installed 9/16 inch diameter lug studs will fit standard 9/16"-18 trailer lug nuts, such as the Open Style Zinc Plated Trailer Lug Nuts 9/16-18 Thread that we carry.

This heavy duty brake drum hub is black painted and is commonly seen on utility trailers with Electric Drum Brakes, or on some Freshwater Boat Trailers with Hydraulic Drum Brakes. You will want to keep in mind that even though this is an 8 bolt hub for a 1 1/4" x 1 3/4" spindle, it will NOT fit with 7,000 lb trailer hub components, you will want to make sure if you are getting replacement backing plates, dust caps, and bearings that they will be compatible with 8,000 lb trailer axles and hubs. This is the Drum Hub only, if you need bearings, seals, lug nuts, or oil caps we have them linked throughout this listing, or available separately on our Hubs and Hub Parts Category.

Features:

- 8 on 6.5" Bolt Pattern

- 9/16"-18 Studs Pre-Installed

- 12 1/4" by 3 3/8" Drum

- Threaded for use with 2 7/8"-12 Trailer Oil Caps

- 4,000lb Capacity (8,000lb for the Pair)

- Black Painted

- Electric or Hydraulic Use

- For use with 8k trailer axles

- Drum Hub ONLY, no bearings or seals

Trailer Brake Drum Hub 8,000lb Oil Hub 9/16" Lug Stud 8 on 6.5 Bolt Pattern Drum Hub Only

Wholesale PRICING:PRICING:

Wholesale PRICING:
PRICING: