Free Shipping on Orders Over $200
Same Day Shipping Before 3:30PM EST
Free Shipping on Orders Over $200
Same Day Shipping Before 3:30PM EST
Wholesale Account
  1. Home
  2. Categories
  3. Trailer Axles And Hubs
  4. Trailer Hubs & Parts
Trailer Bearing 44649 for 2,000 or  3,500lb Trailer Axles, 1 1/16

Trailer Bearing 44649 for 2,000 or 3,500lb Trailer Axles, 1 1/16" ID

Review(s)(0) Write a Review
Part Number: 22273
by : 22273
Trailer Bearing for 2,000lb and 3,500lb Trailers.
Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

PRICING:

Quantity Price
1 - 4 $5.15
5 $2.37
6 - 7 $2.32
8 - 9 $2.28
10+ $2.24
Price $5.15
In Stock
This Trailer Roller Bearing is the Standard Bearing Number 44649, which means it's designed to fit on a 1 1/16" Spindle, and into the Bearing Race # 44610.  This is a Tapered Roller-Style Bearing, which is the most common bearing type among Trailer Hubs.  This particular bearing is typically used on Trailers with a Capacity from 2,000lbs to 3,500lbs.  This Size Bearing is usually seen in 4 Lug or 5 Lug Trailer Hubs, but it is not the only bearing size found in hubs of that capacity.  For this reason, it's always best to check your Trailer Hubs and Axle to make sure you get a proper Bearing replacement for your Boat or Utility Trailer. For example, when used on a  2,000lb Capacity trailer axle with a 1 1/16 inch spindle, this bearing is used in pairs, two per side as these axles utilize a straight spindle. For 3500lb trailer axles, they use a tapered spindle, so a different size wheel bearing inner and outside. This 44649 wheel bearing would be the outer bearing. 

Bearing's need regular maintenance and Periodic replacement in order to keep your trailer in safe operating order.  Most of the time Bearings are replaced in pairs, along with the Trailer Grease Seal.  If you are looking to replace all of your trailer bearings and the grease seals, we do sell Trailer Bearing Kits on our website which could get you all the parts you need in one simple package.  Here is a link to our Bearing Kit Category.

To install a Bearing into your trailer hub, you need to start by Packing the Bearing full of grease.  Take a handful of Trailer Wheel Bearing Grease and press the bearing into it, rotating the bearing as you go to get grease in each of the individual rollers.  Once you've completely packed the bearing, simply drop it into your trailer Hub so it sits inside the matching Race.  Depending on if the Bearing is the Inner or Outer Bearing of the hub, it will be secured into place with either the Hub's Grease Seal or the Flat Washer and Locking Mechanism on your Trailer Spindle.

Specifications:
1 1/16" Inner Diameter
Fits Race 44610
Tapered Bearing
For 2,000lb-3,500lb Trailer Axles
Typically Used in 4 Lug or 5 Lug hubs
0 Items
$("#product_id").removeAttr("style"); $("#price").removeAttr("style")