Trailer Axle Kit 3,500lb Capacity 73 Hub Face 58 Spring Center with Hubs and Leaf Springs

Part Number: 26209

by Suretrac: TCS357358IY

A complete Trailer Axle Assembly with Leaf Springs, Hubs, and U Bolts all pre-installed.

Quantity	Price	Savings
1 - 3	$214.54
4 - 7	$171.63
8 - 15	$160.91
16+	$150.18

On Sale ~~$302.17~~ $214.54

Description

Can you replace your entire Trailer Axle, Hubs, Leaf Springs and U Bolts all at once? It's not always easy, but in some cases, the answer is yes. This 3.5k Trailer Suspension Kit comes with 25 1/4 inch Double Eye Leaf Springs, which are the most common sized leaf springs for trailers, as well as (2) 5 lug Trailer Hubs with the standard 4 1/2 inch bolt pattern. These parts arrive at your door pre-installed to the Painted Steel Axle just as pictured. This particular Boat/Utility Trailer Axle measures 73 inches from Hub to Hub.

It is important to compare all the measurements in this listing to the measurements from your current Trailer Suspension Parts in order to determine if this kit will fit your trailer. Getting an accurate Hub Face measurement is important because it determines your center of tire placement. Getting a new axle with the same hub face as your current axle will keep your tires in the same place in relation to the trailer, though this measurement can sometimes be changed an inch or so when getting a new Trailer Axle depending on your trailer's clearance around the tire. The other measurement for the axle is the spring center measurement, and this measurement has to match exactly between your current trailer axle to the one you're looking to purchase. This is the mounting point for your trailer's suspension, so if it's off by even an inch then this entire kit won't be able to install to your Trailer Frame.

These and other vital measurements are listed below.

Suspension Kit Measurements

Spring Center: 58 inches

Hub Face: 73 inches

Spring Length: 25 1/4 inch, Double Eye

5 on 4.5 inch Hubs (5 Lug, 4 1/2 inch stud spacing)

9/16 inch bushings in the spring, the 9/16 inch trailer bolts are not included

Trailer Axle Kit Features:

Posi-Lube Greaseable Spindles

4-Hole Brake Flange

5 Lug Hubs Pre Installed

Leaf Springs Pre Installed with Zinc Plated U Bolt kit

Ships fully assembled

This particular Trailer Axle Kit requires Double-Eye style leaf spring hangers which measure roughly 25 inches center to center, and a 58 inch wide measurement from the Center of one leaf spring to the Center of the leaf spring on the other side of the trailer in order to fit. You may also need new Leaf Spring Shackles and Bolts, which are not included in this kit.

Stainless Steel 6 Lug Boat Trailer Hub with Bearings for 5200lb Axle

Price: ~~$355.78~~ $277.51 Sale

In Stock

(0)

More Details

Zinc Plated Drive In Trailer Stud 1/2 inch by 2 inch for 3.5k-7K Hubs

Price: ~~$1.74~~ $1.58 Sale

In Stock

(0)

More Details

Trailer Bearing 28580 for 7,000 (8 Lug) Trailer Axles, 2" ID

Price: ~~$26.07~~ $18.51 Sale

In Stock

(0)

More Details

Trailer Replacement Zerk Grease Fitting for Dexter Galvanized Axles

Price: ~~$1.57~~ $1.12 Sale

In Stock

(1)

More Details

Trailer Axle Kit 3,500lb Capacity 73 Hub Face 58 Spring Center with Hubs and Leaf Springs

Wholesale Trailer Supply Pricing

CUSTOMERS ALSO VIEWED