Tie Down Engineering Zinc Plated Drive In Trailer Stud 1/2 inch by 1.25 inch for 3.5k-7K Hubs

Part Number: 23155

by : 63324

Trailer Hub Stud Drive-In .5 inch x 2.25 inch for 5 Lug - 8 Lug Hubs

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Feature: Zinc Plated

Feature: 1/2" - 20

Quantity	Price
1 - 48	$8.79
7 - 13	$7.03
14 - 27	$6.59
28+	$6.15

Price $8.79

Quantity

In Stock

Description

This 1/2" diameter drive-in wheel stud is zinc plated and is designed to replace wheel studs on 3,500 lb to 7,000 lb Tie Down trailer hubs. This is a 2 inch length stud, commonly used on idler hubs, integral disc brake rotors, and drum hubs on boat trailers or utility trailers. If you have a missing or damaged stud on your trailer hubs you would simply hammer this new stud in place of the stud you are replacing and torque down the stud into the hub using and lug nut wrench to fully seat the stud into place. This stud can be used on trailers with disc or drum braking systems, or with idler hubs. You will use a standard 1/2" - 20 thread lug nut to reinstall your wheels to this 2 inch replacement. Make sure your wheels are rolling safely with all of your trailer hub studs in solid working condition, and pick up some of these 1/2" by 2" drive-in studs if you need a replacement!

Specifications

- Stud Thread Diameter: 1/2"

- Threaded Length: 1.25"

- Spline Diameter: 0.54"

- Overall Length: 2.25"

- Thread Pitch: 1/2" - 20

2.441 Trailer Dust Cap installation Tool

Price: $15.09

In Stock

(0)

More Details

Trailer Axle D Washer for 1" Spindles with Flat Spot

Price: $2.39

In Stock

(0)

More Details

Zinc Plated Drive In Trailer Stud 1/2 inch by 2 inch for 3.5k-7K Hubs

Price: $3.69

This Item is Temporarily Out of Stock

(0)

Trailer Axle Castle Nut 3/4 inch for Trailer Spindles

Price: $3.89

In Stock

(0)

More Details

Tie Down Engineering Zinc Plated Drive In Trailer Stud 1/2 inch by 1.25 inch for 3.5k-7K Hubs

Wholesale Pricing

CUSTOMERS ALSO VIEWED