Stoltz End Bell RP-434 1/2" Diameter

This Stoltz Roller End Bell is designed to be paired with the RP-443 or RP-444 to create a Stoltz Bow Stop, and can be purchased as a replacement if one gets damaged.  This is for a single Stoltz End Cap or End Bell, in case you have one that needs replacing, if you are creating your own Stoltz Bow Roller Kit, you would need 2 of these bells, one for each end.  Remember to use a longer Trailer Bolt or Roller Shaft when adding End Caps or Bells to your Rollers.  This Bell requires a 1/2 inch Bolt to fit through it's center bore.  This is made of the same top quality Polyurethane that all Stoltz Products are made from and it won't mark up your boat or dry rot in the sun like rubber does. 

Will not Dry Rot, or mark your boat

Durable Polyurethane Construction

1/2 inch bore

Matches the standard Stoltz 3", 3.5", and 4" bow roller.

3 3/8 inch diameter to 5 1/4 inch diameter on the larger end