Pre Greased Trailer Hub Galvanized 6 Lug for 5200lb Trailer Axle

Review(s) (0) Write a Review

Part Number: 23188

by Distributor: N/A

Pre Greased Trailer Hub Galvanized 5 Lug for 3500lb Trailer Axle 1 3/8" x 1 1/16"

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Choose Your Lug Nuts

Choose Your Dust Cap.

$82.99

Description
Measuring Bolt Patterns:

This listing is for a Pre-Greased Trailer Hub for 5,200lb Trailer Axles. Not only are the Bearings in this Hub pre packed, but high temperature grease has also been chambered within these hubs, for a truly "ready to go" trailer hub assembly. This particular hub is a Hot Dipped Galvanized 6 Lug hub, with a 6 on 5 1/2 standard lug pattern. This hub outfits a 1 1/4" x 1 3/4" tapered trailer spindle, with a 2 1/4" Inner diameter Grease seal surface that is pre-installed as well. This 2 1/4" Measurement would be the diameter of your axles grease seal surface. This hub outfits most standard 5,200lb Capacity Trailer Axles that use #42 trailer spindles. If you are needing a Tang Washer or Cotter Pin for securing your pre-packed hub, simply select the Add On Box under the listing title. The trailer wheel bearings packed within this Hub measure 1 1/4" Inner Diameter and 1 3/4", and feature wheel bearing numbers 15123 ( 1 1/4") and 25580 (1 3/4"). The Grease that is packed within this Hub is Lubrimatic Marine Trailer Wheel Bearing Grease, which has a Calcium Sulfonate base, and features superior corrosion control and lubrication. This makes this Pre Packed hub ideal for all environments.

Pre-Greased Trailer Hub Kit Project Checklist

		Lubrimatic Marine and Trailer Wheel Bearing Grease Tube 14 oz Green for topping off Hub and for future maintenance. This is the grease that is pre packed inside your new hub kit, and it is ideal to use the same grease to ensure proper lubrication and protection.
		Boat Trailer Bearing Buddy - Trailer Buddies Provide pressurized waterproofing as well as easy greasing capabilities for your trailers hub and bearings.
		Trailer Dust Caps - New Dust Caps provide the needed protection and greasing capabilities to protect your trailers axle and wheel bearings.
		Trailer Lug Nuts - If your Lug Nuts are badly rusted, we have Stainless Steel Lug Nuts available to prevent that issue permanently, and also protect your Hub Studs.

Hub Galvanized 8 Bolt fits 6,000 - 7000 lb. axles

Price: $71.99

In Stock

(1)

More Details

1.98 Trailer Dust Cap installation Tool

Price: $17.99

In Stock

(9)

More Details

Trailer Axle D Washer for 1" Spindles with Flat Spot

Price: $1.99

In Stock

(0)

More Details

2.73 Dust Cap Stainless Steel Replacement for Posi-Lube, Ez Lube Axles

Price: $10.99

In Stock

(0)

More Details

Pre Greased Trailer Hub Galvanized 6 Lug for 5200lb Trailer Axle

Complete Your Project:

CUSTOMERS ALSO VIEWED