Knott Zinc Plated Drive In Standard Long Trailer Stud 1/2"-20 by 2.50" for 3.5k-6k Knott Torsion Axle Hubs

Review(s)(0) Write a Review

Part Number: 27419

by Knott: 6X0039M016

Knott Trailer Hub Stud Drive-In .5 inch x 2.5 inch for 5 Lug - 6 Lug Knott Torsion Axle Hubs

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Quantity	Price
1 - 8	$2.99
9 - 11	$1.18
12 - 14	$1.12
15 - 19	$1.07
20+	$1.00

Retail Price $2.99

Quantity

In Stock

Description

This 1/2 inch zinc-plated trailer drive-in hub stud is a direct replacement for studs on 5 lug and 6 lug boat trailer torsion axles from Knott. These are the exact style of hub studs that come preinstalled on our selection of 3,500 lb Knott Autoflex Torsion Axles and 6,000 lb Knott Autoflex Torsion Axles, so you can be sure that you're getting the exact part you need to replace any missing or broken hub studs. The longer 2 1/2 inch length makes this hub stud ideal for trailer axle hubs with slip-over hydraulic brakes, as the extra length is needed to pass through the slip-on rotor and have enough threading exposed to install a lug nut. The stud is installed by hammering in the replacement stud in your hub's empty lug spot and then torquing down the stud to your hub face with a wrench to fully seat the stud allowing you to safely remount your trailer wheel. These studs use standard sized 1/2" - 20 thread pitch lug nuts, so there is a wide range of compatible lug nuts that you can use with these lug studs on your hub!

Specifications

- Stud Thread Diameter: 1/2"

- Threaded Length: 1.94"

- Spline Diameter: 0.54"

- Stud Length: 2.50"

- Thread Pitch: 1/2" - 20

Knott Zinc Plated Drive In Standard Long Trailer Stud 1/2"-20 by 2.50" for 3.5k-6k Knott Torsion Axle Hubs

Wholesale PRICING:PRICING:

Wholesale PRICING:
PRICING: