Hub Galvanized 4 Bolt fits 2k-2.5k lb. axles 1 1/16in Bearings In/out

Review(s)(4) Write a Review

Part Number: 23180

by :

Hub Galvanized 4 Bolt fits 2000-2500 lb. axles 1 1/16 inch x 1 1/16 inch bearings

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Quantity	Price
1 - 4	$37.63
5	$27.69
6 - 7	$26.68
8 - 9	$25.75
10+	$24.46

Price $37.63

Quantity

In Stock

Description
Customer Reviews
Measuring Bolt Patterns:

Hot Dipped Galvanized Hub, great for Boat trailers! This Trailer Hub works for trailers with straight spindles that accommodate 1 1/16 inch diameter bearings. Common trailer tire sizes for this capacity trailer hub are 8 inch - 13 inch.

Fits 2000-2500 lb. Axles

Includes hub, bearings, and seals

Outer Bearing Number 44649 1 1/16 inch inner diameter

Inner Bearing Number 44649 1 1/16 inch inner diameter

Rear Seal Dimensions:

The Grease seals included in this kit are a 1 1/4" Inner Diameter Seal and a 1 1/2" Inner Diameter Grease Seal. You will only use one of these Sizes on your Axles Spindle. We include both for customer convenience, as sometimes it is very difficult to know which is needed. On the Axles we sell, they use the 1 1/2 Grease Seal. Test Fit both on your trailers spindle, and discard the one that will not fit. Only one Grease seal is used per hub.

Rated to 1250 lbs each

If you've ever experienced difficulty installing dust caps, check out this 1.98 Trailer Dust Cap installation Tool for much easier installation

Fisherman

Just installed the hubs. Too early to tell if they are going to hold up for the long haul. The outer bearing races were pre-installed in the hub but I would have preferred to install them myself to make sure they were put in fully. The overhaul quality of the hub itself is fair but as long as they rotate true I guess for the price they are satisfactory. They are made in Ch-i-na.

Did you find this helpful?

Reviewed by: John Wilson from Georgia on 6/8/2020

galvanized hubs

Received on time and product is as described.

Did you find this helpful?

Reviewed by: LT from FL on 10/2/2017

galvanized hubs

Well made galvanized hub at a very good price.

Did you find this helpful?

Reviewed by: Dave from FL - Florida on 12/13/2016

Great little trailer hubs

These were purchased to bring back an older 12' boat trailer. This trailer will be dunked in salt water from time to time, so galvanized hubs are the way to go. They arrived quickly, and despite having to cut the old races off, everything went on as it should. I took a 100+ mile trip and everything looks great. Completely satisfied.

Did you find this helpful?

Reviewed by: Stewart Rudnicki from Ipswich, MA on 5/7/2013

Hub Galvanized 4 Bolt fits 2k-2.5k lb. axles 1 1/16in Bearings In/out

Wholesale PRICING:PRICING:

Wholesale PRICING:
PRICING: