Galvanized Steel Channel Style Trailer Spring Seat Clamp On 2 in Square Axles

Review(s)(0) Write a Review

Part Number: 25576

by : 25576

Trailer Axle Galvanized Spring Seat for 2 inch Square Axle

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Quantity	Price
1 - 4	$4.72
5	$1.97
6 - 7	$1.93
8 - 9	$1.89
10+	$1.85

Price $4.72

Quantity

In Stock

Description

This galvanized steel channel-style spring seat is designed to replace spring perches on 2-inch square trailer axles. It is important to have your trailer's spring seats in good condition, as they are the primary connection point keeping your trailer axle fully connected to your trailer's spring seats and ultimately the trailer frame itself. Replacement seats such as these can be a crucial part of your trailer repair job if you have compromised or damaged seats, so make sure you are inspecting and replacing the spring seats on your boat trailer or utility trailer whenever necessary! These spring seats are compatible with all of our range of Galvanized 2-inch Square Trailer Axles, and most 2-inch square trailer axles, such as those manufactured by Rockwell and Dexter. The galvanized steel construction makes this axle spring mount a great choice for boat trailers, as it will effectively resist rust and corrosion better than a raw steel or primer finish spring seat would. This spring seat is designed with tabs on the side to keep the seat in place, if you require a deeper seat for your axle you will need our Galvanized Steel Heavy-Duty U Style 2-inch Square Spring Seat.

The seat can be used on axles that are either overslung or underslung, meaning that the seat itself can be oriented on either the top or bottom of the axle for the springs to be clamped on with a U-bolt kit. This Spring Seat is designed to fit around a 2-inch axle without needing to be drilled or welded, you will just need to measure out the correct spacing and firmly clamp the springs to your axle with a Trailer U-Bolt Kit. This makes it a great option for axles that have a damaged or missing spring seat and need a replacement, without going out and replacing the whole axle or dealing with welding or drilling your axle to get new spring seats to fit. These seats work well as a replacement on a wide range of applications from light to medium duty boat trailers, utility trailers, jet ski trailers, or any trailer with a 2-inch square trailer axle and equivalent style spring seats!

Specifications:

- Galvanized Steel Construction

- Channel Style Spring Seat with Tabs for keeping the seat in place

- Clamp-On Installation, No Welding or Drilling Required

- Fits 2 inch Square Axles (commonly 2,000-3,500lb capacity)

Galvanized Steel Channel Style Trailer Spring Seat Clamp On 2 in Square Axles

Wholesale PRICING:PRICING:

Wholesale PRICING:
PRICING: