This Listing is for an Adjustable Bow Rest Catcher for the front of your Boat Trailer. This item would mount to the tongue of your trailer, between your Winch Post and the Bow of your Boat. The purpose of this item, is to give your boats bow a great surface to rest up against, which could be in addition to your Winch Post Bow Stop or Roller. The spacing between the carpeted bunks are 16 inches apart and the dimensions of the tubing it is attached to is 3 inches x 3 inches. While the tubing the carpeted part goes over, measures 2 1/2 inches x 2 1/2 inches. Many times different boat ramps will have different angles, and depending upon the tide, you may load your boat differently as a result. Sometimes when the boat settles, it may be tough to know if you have the boat seated properly. If you use this device, you will always have a great surface to secure the bow of the boat against. Typically your Trailers Tongue material will extend to your first crossmember, and this where this item will mount.
This is a Hot Dipped Galvanized Adjustable Bow Assembly, with the Adjustment being a Bolt Threaded into the Outer Housing. You can see the pictures with this listing for better detail and adjustment options.
This Bow Support Features Pre Carpeted Board Supports for safely containing the bow of your boat without damage.
This bow support mounts on 3 inch wide Tongue or Frame Material. You can mount this on 3 x 3 or 3 x 4 material, you would just need to select the appropriate (2) U Bolts for the height of your Frame.