This is a Hot-Dipped Galvanized Fender Mounting Bracket for your Single Axle Boat Trailer. There are many variations of these fender mounting set-ups so check the measurements to ensure this one will work for you. Ideally, one your single axle boat trailer, you would use two of these fender brackets to mount your Single Axle Trailer Fenders. These Galvanized Fender Brackets are most commonly seen on smaller Galvanized and Aluminum Fenders used for 13 inch tires and down to 8 inch trailer tires. You would mount one towards the front and one towards the rear of the fender , we have Boat Trailer U-Bolts and Trailer Bolts available if you are needing mounting hardware. The holes that are pre-drilled in this fender bracket are for 3/8 inch diameter bolts. This Single Axle Fender Bracket is very similar to another one we have available, but measures longer on both leg portions and has different hole spacing, so be careful identify which one is more ideal for your application.
Be sure to check the pictures to make sure the measurements in the photo are the correct size and spacing for your project. This is a listing for (1) Bracket, you would commonly need (2) to replace an entire fender.