Free Ground Shipping on orders over $150
  1. Home
  2. Categories
  3. Boat Trailer Parts
  4. Boat Trailer Bunk Brackets

Boat Trailer Bunk Bracket 8 inch Swivel Top Galvanized

Review(s) (6) Write a Review
Part Number: 22662-K
by CE Smith Co.: 10000G
Whole kit to fix those bunk brackets! Boat Trailer Swivel Top Bunk Brackets
Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Complete Your Project:

$7.99
In Stock
This 8 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for boat trailer bunk board set ups that commonly use Bunk Board 2 in x 4 in sets and also to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted to cross members in front and behind the axle, a common single axle trailer might have (4) of these. These galvanized 8 inch Bolster Brackets have slotted 1/2 inch diameter holes to accommodate 1/2 inch Trailer Bolts or Boat Trailer U-Bolts and comes with a zinc plated 7/16" x 1" to mount the top bracket. The slotted holes allow you to adjust the height of the bunks. We offer these in 10 inch Bunk Bracket Swivel Top and 12 inch Bunk Bracket Swivel Top if you need a different height for your adjustment. The 8 inch measurement is the length of the bracket itself.
Keep in mind when replacing the entire Swivel Top Bunk Bracket you commonly will also need new mounting Bolts or U-Bolts, and also will be needing replacement Bunk Bracket Lag Screws to re-mount your bunk boards if you are using a 2 x 4 or 2 x 6. There is an image that shows a Model of a Swivel Top Bunk Bracket attached to a 3 by 3 Cross-Member using a U-Bolt (This Does not represent how every swivel top is mounted, but just shows an example.) These Swivel Top Bunk Brackets are also commonly mounted to cross members that are C Channel in shape and have different dimensions. Measure your frame dimensions, or simply measure your previous U-Bolts if you are replacing with the same setup! 
Swivel Top Bunk Bracket Project Check List:


 
  Boat Trailer U-Bolts are used to mount your new Bunk Brackets to your trailers Cross Member, measure the height and width of your frame and select from Galvanized or Stainless Steel Trailer U Bolts in 1/2" Diameter.

   Bunk Bracket Lag Screws are used to secure your boat trailers Bunk Boards to your Swivel Top Bunk Bracket, available in stainless steel and galvanized. 

   Marine Bunk Board Carpet is used to wrap your boat trailers bunk boards to protect your boat hull from damage, available in several different widths for 2" x 4" and 2"x 6" boards. 

   Boat Trailer Bunk Boards are used to support your boats weight and assist with loading and unloading and are mounted directly to the Bunk Bracket with Lag Screws. 


CUSTOMERS ALSO VIEWED

Price: $14.99
In Stock
(3)
Price: $1.49
In Stock
(10)
Price: $21.99
In Stock
(0)
TOP