Autoflex-Knott 6000lb 94 inch Hub Face V Bend Galvanized 2 x 3 Trailer Axle with Pre-Installed 6 Lug Idler Hubs

This Knott 6,000lb capacity Galvanized Boat trailer axle has a V-Bend in the center for clearance with your Boat's Hull and includes pre-greased and is constructed from sturdy 2" x 3" tubing. This 6,000 lb capacity 6 lug trailer axle has a hub face measurement equal to 94". It comes equipped with Galvanized 6 Lug Idler Hubs with a 6 on 5.5 inch bolt pattern, and features a greasable spindle, along with the standard 2.441 inch Accu-Lube Style Dust Cap so you can easily add grease to the Bearings based on your maintenance schedule.  

This Axle also has a standard 5 Hole Brake Flange for installing Trailer Disc Brakes, and fits trailers that have a Spring Center Measurement of 76" to 81.5". This Axle has Adjustable Spring Seats, so we've included 2 Galvanized Bolt-On Spring Seats as a free addition as with all Knott Spring Axles to make fixing your trailer even easier.

The 6000lb capacity Galvanized Trailer Hubs are included and pre-installed on this V-bend Spring Axle.  The Trailer Hubs use a standard 6k Capacity Bearing Combination, with a 1 3/4-inch inner bearing (Bearing Number 25580) and a 1 1/4-inch outer bearing (Bearing Number 15123).  The Seal Size for this galvanized hub is 2 1/4. The Boat Trailer Hub uses the standard size lug nuts for trailer hubs and wheels, ½”x20, and the bolt pattern is 6 on 5.5 inches.  

This Galvanized Boat Trailer Axle does not include brakes, but there is a standard 5 hole brake flange so you can mount disc brakes to it, or swap out the hub to drum if you prefer.

This pre-installed hub is already greased with a Lithium Based Grease.  Additional Lithium Grease may be applied before use.

Do you have extra thick leaf springs on your trailer that won't mount properly to your axle with standard length U-Bolt Kits? We carry an Extra Long Trailer Leaf Spring Galvanized U-Bolt Kit for 2 x 3 Axles with 7 1/4 in Long U-Bolts that is perfect for use with this axle!

Axle Features:

Completely Hot-Dipped Galvanized Construction

2 x 3 Galvanized Tubing with V-Bend for Extra Boat Clearance

6,000lb Capacity

Pre-Loaded 6 Lug Hubs (6 on 5.5" Bolt Pattern)

5-Hole Brake Flange for installing Brakes

Drain-Hole at the bottom of the V-Bend to Release Water Buildup

Greaseable Spindle