Free Shipping on Orders Over $200
Same Day Shipping Before 3:30PM EST
Free Shipping on Orders Over $200
Same Day Shipping Before 3:30PM EST
Wholesale Account
  1. Home
  2. Categories
  3. Trailer Axles And Hubs
  4. Trailer Axles
Autoflex-Knott 3500lb 94 inch Hub Face V-Bend Galvanized Trailer Axle with Pre-Installed Idler Hubs

Autoflex-Knott 3500lb 94 inch Hub Face V-Bend Galvanized Trailer Axle with Pre-Installed Idler Hubs

Review(s)(0) Write a Review
Part Number: 26939
by Knott: 26939
Knott Autoflex Hot Dipped Galvanized Boat Trailer Axle 94 Hub Face 3500 Pound Capacity
Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Complete Your Project

PRICING:

Quantity Price
1 - 3 $428.46
4 - 7 $342.77
8 - 15 $321.35
16+ $299.92
Price $428.46
In Stock
Replacing your Galvanized Boat Trailer Axle has never been easier!  Manufactured by Autoflex Knott, this Galvanized Axle comes equipped with Pre-installed Galvanized Idler Hubs as well as a brake flange so you can install Drum or Disc Brakes to your Trailer with ease.  This Axle has Adjustable Spring Seat Centers as well, so we've included 2 Galvanized Bolt-On Spring Seats as a free addition with all Knott Spring Axles to make fixing your trailer even easier.
This Trailer Axle has a 'V-Bend' in the center which provides additional clearance for the hull of your boat, and has a Weight Capacity of 3,500lbs.  The included pre-installed hubs contain the standard 1 3/8" x 1 1/16" bearing combination (Bearing Numbers 68149 and 44649) that is commonly seen in trailer hubs of this weight capacity, and the grease Seal has in inner diameter of 1.719".
The Hub Face Measurement for a new axle is critically important, it is taken from the outside of one hub to the outside of the hub on the opposite end of the axle.  This measurement tells you where the center of your tires will sit on the trailer, so when getting a new axle it's best to get one that has a similar hub face measurement to your current trailer axle. This Axle's Hub Face Measurement is equal to 94".
The Spring Center Measurement is Equally important, that's the measurement from the center of 1 leaf spring to the center of the leaf spring on the opposite side of the trailer.  This is the mounting point for your trailer axle, so it's important that you get a new axle that can fit in that same location on your trailer, otherwise the axle will not line up properly and won't be able to be installed.  This Axle fits Trailers that have a Spring Center Measurement of 76" to 81.5".
Knott brand components are always high-quality and built-to-last.  This Axle is no different, it's made of 2x2 steel tubing that is 1/4" thick, and then hot-dipped galvanized for excellent corrosion resistant properties.

Axle Specifications:
- 94" Hub Face Measurement
- Spring Center Measurement (Adjustable) 76" - 81.5"
-4 Hole Brake Flange
-Hot Dipped Galvanized Steel Tubing (2" x 2" x 1/4" thick) 
-Drainage Holes to allow Water to drain out of the tubing
Hub/Spindle Specifications:
-5 on 4.5" Bolt Pattern
-Inner Bearing - 68149 or 1 3/8 inch inner diameter
-Outer Bearing - 44649 or 1 1/16 inch inner diameter
-Grease seal - 1.719 inches inner diameter
-Stainless Steel Wear Sleeve on the Axle Spindle
-EZ Lube Grease Fitting on the end of the Trailer Spindle

0 Items
$("#product_id").removeAttr("style"); $("#price").removeAttr("style")