29 inch 5 Leaf Slipper Spring 2250lbs per spring

Part Number: 24036

by Distributor: 24036

Slipper Spring 29 inch for your Boat or Utility Trailer

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Add Ons

(1) - 1/2 Spring Bushing (+$1.59) (1)-1/2 x 3 1/2 Zinc Plated Spring Bolts (+$4.69) (1)-1/2 x 3 1/2 Stainless Steel Spring Bolts (+$5.89) (1) T-9 Boeshield Rust & Corrosion Protection Spray (+$26.29)

Quantity	Price	Savings
1 - 6	$72.79
7 - 13	$58.23
14 - 27	$54.59
28+	$50.95

Price $72.79

Quantity

In Stock

Description

29 inch Slipper Spring with 5 Leafs that is rated to 2250 lbs per spring. This would bring a pair of these 29 inch Slipper Trailer Leaf Springs to 4500 pounds. These are common on 3500 lb trailer axles.
Spring Measurements and Specs:
Center of Eye to End of Leaf 30 1/4 inches (Free Length Measurement)
-Does your spring measure slightly more than 30 1/4 inches, lets say 30 3/4 or so? You may have your trailer loaded, or the spring may be old and flattened out. It is not uncommon for leaf springs to measure longer than what the stock size is listed.
Free Arch Measurement (see picture) 4 3/4 inches
-The free arch measurement is based off a stock, brand new spring. Your leaf spring will more than likely be flattened out, or possibly broken.
-This Trailer Leaf Spring measures 1 3/4 inches wide
9/16 inch bushings come installed in the spring, these bushings are common on all types of trailers except boat trailers. If you are purchasing these for your boat trailer, you will need 1/2 inch bushings to be installed. Click here to select Spring Bushings

These springs can be used on both square tube or round tube trailer axles on boats or land trailers. The only difference is in the style of U-Bolt Required to mount the spring to the axle. Check the condition of your U-Bolts and the required size and check our U Bolt Kits out here. Leaf Spring U-Bolt Kits. Available in raw steel, hot-dipped galvanized, and stainless steel.

Commonly when replacing leaf springs, the spring bolts may also be needing replacement. As stated before, if you are purchasing for a land trailer(not boat trailer) you will be using 9/16 x 3 inch bolts , if this is for a boat trailer, check out zinc plated or stainless steel spring bolts that measure 1/2 by 3 1/2 inches Leaf Spring Bolts

If you are planning on replacing the hangers, (brackets that are either welded or bolted to frame that hold leaf spring) we have single spring hanger kits available for Weld On assemblies that include all the necessary replacement hardware. Weld on assemblies are more common on non marine trailers.Spring Hangers
Boat trailers will commonly have bolt-on hangers or spring sliders.

24 inch Reverse Curve 5 Leaf Spring 1500lb per spring

Price: $97.59

This Item is Temporarily Out of Stock

(0)

25 inch 2 Leaf Slipper Spring 500lb Capacity

Price: $36.29

In Stock

(5)

More Details

Trailer Leaf Spring Bushing 9/16 inch ID, 1 inch OD

Price: $4.09

In Stock

(6)

More Details

20 inch Marine Coated Double Eye 3 Boat or Utility Trailer Leaf Spring

Price: $48.49

In Stock

(0)

More Details

29 inch 5 Leaf Slipper Spring 2250lbs per spring

Complete Your Project

Wholesale Trailer Supply Pricing

CUSTOMERS ALSO VIEWED