25 inch 4 Leaf Slipper Spring 1000lb Capacity

Review(s)(5) Write a Review

Part Number: 24031

by NA: 24031

Light Duty Slipper Leaf Spring for Utility or Boat Trailer

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Quantity	Price
1 - 4	$39.00
5	$27.61
6 - 7	$26.44
8 - 9	$26.00
10+	$25.57

Price $39.00

Quantity

In Stock

Description
Customer Reviews

25 inch Slipper Spring with 4 Leafs that is rated to 1000 lbs per spring. This would bring a pair of these 25 inch Slipper Trailer Leaf Springs to 2000 pounds. These are common on 2000 lb trailer axles.
Spring Measurements and Specs:
Center of Eye to End of Leaf 25 1/4 inches (Free Length Measurement)
-Does your spring measure slightly more than 25 1/4 inches, lets say 25 3/4 or so? You may have your trailer loaded, or the spring may be old and flattened out. It is not uncommon for leaf springs to measure longer than what the stock size is listed.
Free Arch Measurement (see picture) 5 inches
-The free arch measurement is based off a stock, brand new spring. Your leaf spring will more than likely be flattened out, or possibly broken.
-This Trailer Leaf Spring measures 1 3/4 inches wide
9/16 inch bushings come installed in the spring, these bushings are common on all types of trailers except boat trailers. If you are purchasing these for your boat trailer, you will need 1/2 inch bushings to be installed. Click here to select Spring Bushings

These springs can be used on both square tube or round tube trailer axles on boats or land trailers. The only difference is in the style of U-Bolt Required to mount the spring to the axle. Check the condition of your U-Bolts and the required size and check our U Bolt Kits out here. Leaf Spring U-Bolt Kits. Available in raw steel, hot-dipped galvanized, and stainless steel.

Commonly when replacing leaf springs, the spring bolts may also be needing replacement. As stated before, if you are purchasing for a land trailer(not boat trailer) you will be using 9/16 x 3 inch bolts , if this is for a boat trailer, check out zinc plated or stainless steel spring bolts that measure 1/2 by 3 1/2 inches Leaf Spring Bolts

If you are planning on replacing the hangers, (brackets that are either welded or bolted to frame that hold leaf spring) we have single spring hanger kits available for Weld On assemblies that include all the necessary replacement hardware. Weld on assemblies are more common on non marine trailers.Spring Hangers
Boat trailers will commonly have bolt-on hangers or spring sliders.

commander and chief

Could not find this size anywhere local to me and the pricing was like $190 a spring which I thought was high. Ordered these and shipping was quick and the product fits well and was a perfect replacement for my old springs. Have not tested on a long haul yet, but they hold my boat fine.

Did you find this helpful?

Reviewed by: James Tule from Littleton on 5/26/2021

They were ok, little bit taller than my normal

I purchased these after having hell trying to find my original trailer Springs by Triton trailer. The Triton trailer manufacture was in Wisconsin and I had to go through my dealer and then have them ship down here and there were about 45 to $50 per Spring. I thought that that wasn't worth it so after finding these springs online that were less expensive for a higher rated spring I bought this leaf Spring setup and I bought several other bushings. I didn't need any other bushings because the one that it came with was fine. But because the bushings were only $3 they were thrown away. I put the axle on and it sat up a little bit taller then stock and my friend recommended that I flip the axle over on the leaf Spring. Technically it would work but I only had an inch of clearance between my fenders and the tire when I flipped it over. I flipped the axle back to the normal way of having it so my trailer sits up a little taller. Now when I go in the water I'll just have to dunk it in a little bit further. What I did do and I also recommend is everybody put rust inhibitor all over this stuff. I used LPS and hopefully will extend the life out of this Leaf Spring. The install of the leaf Spring was super easy but the uninstall of my factory was a pain in the ass. All in all I would recommend this leaf Spring to my friend.

Did you find this helpful?

Reviewed by: Christopher Wilke from Seabrook on 2/21/2020

Leave Spring's

They fit like a glove but bolthead should have been on bottom had to grind off to make fit no big deal

Did you find this helpful?

Reviewed by: Daniel L Riddle from Madison on 10/15/2019

Teacher

Upgraded the Highlander trailer under my Boston Whaler from 1200 lbs to 2000 lbs with these springs. Perfect retrofit and easy to install.

Did you find this helpful?

Reviewed by: Matt from Ojai, CA on 8/27/2018

Springs

replaced my original 700lb springs with this 1000lb version. Really satisfided with them. trailer sits a little higher but thats no problem.

Did you find this helpful?

Reviewed by: Paul Moore from Longboat Key , Fl on 2/6/2013

25 inch 4 Leaf Slipper Spring 1000lb Capacity

Wholesale PRICING:PRICING:

Wholesale PRICING:
PRICING: