Your Cart:
0 item(s) / Total: $0
We'll Beat Any
Price By 10%
Get The Details Here
Free Shipping Over $150
Best Price Guarantee
25 1/4 inch Double Eye 3 Leaf Spring 2,000lb Capacity
by Distributor : N/A
Part Number: 24006
Average Rating

25 1/4 inch Double Eye 3 Leaf Spring 2,000lb Capacity


In Stock

Choose Options and Quantity

(2) Trailer Leaf Spring Bushing 1/2 Inch ID [+$1.84]
(2) 2 1/2" Galvanized Shackles For 1/2" Bolts [+$4.98]
(3) 1/2" x 3 1/2" Stainless Steel Spring Bolts [+$12.60]
Best Price Guarantee

25 1/4 inch Double Eye 3 Leaf Spring that is rated to 2000 lbs per spring. This would bring a pair of these 25 1/4 inch Double Eye Trailer Springs to 4000 pounds. These are common on 3500 lb trailer axles.  
Spring Measurements and Specs:
Eye to Eye Measurement  25 1/4 inches (Free Length Measurement)
-Does your spring measure slightly more than 25 1/4 inches, lets say 25 3/4 or so? You may have your trailer loaded, or the spring may be old and flattened out. It is not uncommon for leaf springs to measure longer than what the stock size is listed. 
Free Arch Measurement (see picture) 3 inches
-The free arch measurement is based off a stock, brand new spring. Your leaf spring will more than likely be flattened out, or possibly broken. 
Spring measures 1 3/4 inches wide
9/16 inch bushings come installed in the spring, 1/2 inch are available as an add on.

These springs can be used on both square tube or round tube trailer axles on boats or land trailers. The only difference is in the style of U-Bolt Required to mount the spring to the axle. Check the condition of your U-Bolts and the required size and check our U Bolt Kits out here. Leaf Spring U-Bolt Kits. Available in raw steel, hot-dipped galvanized, and stainless steel. 

If you are planning on replacing the hangers, (brackets that are either welded or bolted to frame that hold leaf spring) and shackles (2 shackles towards rear of spring assembly for single per side or 4 in the middle for tandem trailer per side) We have single and double spring hanger kits available for Weld On assemblies that include all the necessary replacement hardware. Weld on assemblies are more common on non marine trailers.Spring Hangers
Boat trailers will commonly have bolt-on hangers or spring sliders. 

    5 Stars
    Great springs
    One spring was bad, but chose to replace all four due to the trailer being 10 years old. Took the boat out today, first time since installing and could FEEL the difference towing. The previous jolts and jerks felt while driving the truck were no more as the new springs did their job. Highly recommended!
    Reviewed by:  from Northlake. on 7/31/2011

    e-commerce price conversion
    Subscribe to our Newsletter.
    Enter you Email address below and press the GO button.