25 1/4 in Double Eye 2 Leaf Trailer Spring 1200lb Capacity

Part Number: 24005

by Distributor: N/A

25 1/4 inch Double Eye 2 Leaf Utility or Boat Trailer Spring

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Double Eye Springs

(2) Trailer Leaf Spring Bushing 1/2 Inch ID [$1.84] (2) 2 1/2 Galvanized Shackles For 1/2 Bolts [$4.98] (3) 1/2 x 3 1/2 Stainless Steel Spring Bolts [$13.35]

$43.99

Quantity

In Stock

Description

25 1/4 inch Double Eye 2 Leaf Spring that is rated to 1200 lbs per spring. This would bring a pair of these 25 1/4 inch Double Eye Trailer Springs to 2400 pounds. These are common on 20000 to 3500 lb trailer axles.

Spring Measurements and Specs:

Eye to Eye Measurement 25 1/4 inches (Free Length Measurement)

-Does your spring measure slightly more than 25 1/4 inches, lets say 25 3/4 or so? You may have your trailer loaded, or the spring may be old and flattened out. It is not uncommon for leaf springs to measure longer than what the stock size is listed.

Free Arch Measurement (see picture) 3 inches

-The free arch measurement is based off a stock, brand new spring. Your leaf spring will more than likely be flattened out, or possibly broken.

-This Trailer Leaf Spring measures 1 3/4 inches wide

9/16 inch bushings come installed in the spring, 1/2 inch are available as an add on.

These springs can be used on both square tube or round tube trailer axles on boats or land trailers. The only difference is in the style of U-Bolt Required to mount the spring to the axle. Check the condition of your U-Bolts and the required size and check our U Bolt Kits out here. Leaf Spring U-Bolt Kits. Available in raw steel, hot-dipped galvanized, and stainless steel.

If you are planning on replacing the hangers, (brackets that are either welded or bolted to frame that hold leaf spring) and shackles (2 shackles towards rear of spring assembly for single per side or 4 in the middle for tandem trailer per side) We have single and double spring hanger kits available for Weld On assemblies that include all the necessary replacement hardware. Weld on assemblies are more common on non marine trailers.Spring Hangers

Boat trailers will commonly have bolt-on hangers or spring sliders.

29 inch 3 Leaf Slipper Spring 1500 lb Capacity

Price: $25.99

In Stock

(1)

More Details

27 in Double Eye 4 Leaf Trailer Spring 1750b Capacity

Price: $29.99

In Stock

(3)

More Details

22 inch Reverse Curve 6 Leaf Spring 1750lb per spring

Price: $79.99

In Stock

(1)

More Details

25 inch 3 Leaf Slipper Spring 700lb Capacity

Price: $28.99

In Stock

(0)

More Details

25 1/4 in Double Eye 2 Leaf Trailer Spring 1200lb Capacity

Complete Your Project:

CUSTOMERS ALSO VIEWED