This galvanized boat trailer axle is manufactured by Dexter Axle and has a 2200 lb. weight capacity. Dexter Axle galvanized boat trailer axles are Hot-Dipped Galvanized for optimal corrosion resistance and superior protection from salt water. Dexter Axle is a leader in axle manufacturing and features AMERICAN MADE PRODUCTS. These axles are made of 2 inch x 2 inch x 3/16 inch thick square tubing.
The straight spindle design on the 2200lb axle accommodates the following bearing and seal sizes:
-Inner Bearing - 44649 or 1 1/16 inch inner diameter
-Outer Bearing - 44649 or 1 1/16 inch inner diameter
-Grease seal - 1 1/2 inches inner diameter
The spindle features a Stainless Steel Wear Sleeve to allow for long term protection for your seal surface. This ensures your seal surface won't corrode away, meaning it will not pit or rust which would normally lead to letting water into your hub. Dexter Axle spindles also feature an E-Z Lube system, which allows easy greasing and regular maintenance of bearings. The grease travels through the center of the spindle and pushes out the old grease forward towards the front of the hub and out your dust cap, therefore replacing the old grease with new fresh grease. A castle nut and spindle washer are included on each spindle.
Our Axles DO NOT REQUIRE DRILLING OR WELDING!
Our MADE IN THE USA , Proprietary and Patent Pending Adjustable Spring Seats allow for adjustment to your specific measurements. These Hot-Dipped Galvanized Adjustable Spring Seats mean your axle will last longer, with no holes for saltwater and corrosion to hide. These Galvanized Adjustable Spring seats are included free of charge with the purchase of your axle.
Galvanized Axle Features:
Galvanized Axle Measurements:
This is a Straight axle with No brake flange (meaning you cannot attach brakes to this axle).
Hub Face (Axle Track) refers to measuring from the OUTSIDE FACE of one hub to the OUTSIDE FACE of the opposing hub ACROSS the axle. Refer to axle measuring video for assistance. This measurement is also typically referred to as the Track Measurement or Center of Tire to Center of Tire measurement.
Spring Seat Measurement refers to the measuring of your leaf springs from the center of one spring, across the axle to the center of the opposing spring. Getting assistance with this measurement from a friend is recommended. Refer to axle measuring video for assistance.
The Spring Seat Measurement is very important to ensure the safe and proper installation of this axle. If your Spring Seat measurement does not fall into the specified range, we cannot guarantee the successful installation or performance of your axle. Using a spring seat measurement that is too narrow will likely lead to your axle bending. Using a spring seat measurement that is too wide will lead to your tires rubbing on your trailer frame and/or leaf springs. Please verify that your Spring Seat Measurement falls into the range specified to avoid any problems.
How to Measure an Axle Video:
Trailer Axle Project Check List:
Replacing an axle in a trailer that the manufacturer was no longer in business. After watching the video and understanding the measurements, ordered the correct axle. Arrived in two days and was a perfect fit. Whole process made easier by purchasing matching parts to complete the replacement
Reviewed by: Pat Cox from Minnesota on 4/18/2018
Quality well built ! Greasing the bearings will be a breeze. I don't believe that I could have found a better axle !
Reviewed by: Carlton from Bellevue on 9/4/2016
Arrived on time, undamaged. Good quality
Reviewed by: Dave j from L A Area on 1/18/2016
BEST SERVICE EVER
Great product! Replaced the whole suspension, axle, springs, hubs everything. Great advice from the tech staff. Super fast shipping. Ordered on Monday and it was on my door step Thursday and installed by Friday. These guys are great. Don't shop around just buy it here.
Reviewed by: Dave from New Hampshire on 8/11/2015