This galvanized boat trailer axle is manufactured by Dexter Axle and has a 2200 lb. weight capacity. Dexter Axle galvanized boat trailer axles are Hot-Dipped Galvanized for optimal corrosion resistance and superior protection from salt water. Dexter Axle is a leader in axle manufacturing and features AMERICAN MADE PRODUCTS. These axles are made of 2 inch x 2 inch x 3/16 inch thick square tubing.
The straight spindle design on the 2200lb axle accommodates the following bearing and seal sizes:
-Inner Bearing - 44649 or 1 1/16 inch inner diameter
-Outer Bearing - 44649 or 1 1/16 inch inner diameter
-Grease seal - 1 1/2 inches inner diameter
The spindle features a Stainless Steel Wear Sleeve to allow for long term protection for your seal surface. This ensures your seal surface won't corrode away, meaning it will not pit or rust which would normally lead to letting water into your hub. Dexter Axle spindles also feature an E-Z Lube system, which allows easy greasing and regular maintenance of bearings. The grease travels through the center of the spindle and pushes out the old grease forward towards the front of the hub and out your dust cap, therefore replacing the old grease with new fresh grease. A castle nut and spindle washer are included on each spindle.
Our Axles DO NOT REQUIRE DRILLING OR WELDING!
Our MADE IN THE USA , Proprietary and Patent Pending Adjustable Spring Seats allow for adjustment to your specific measurements. These Hot-Dipped Galvanized Adjustable Spring Seats mean your axle will last longer, with no holes for saltwater and corrosion to hide. These Galvanized Adjustable Spring seats are included free of charge with the purchase of your axle.
Galvanized Axle Features:
Galvanized Axle Measurements:
This is a Straight axle with No brake flange (meaning you cannot attach brakes to this axle).
Hub Face (Axle Track) refers to measuring from the OUTSIDE FACE of one hub to the OUTSIDE FACE of the opposing hub ACROSS the axle. Refer to axle measuring video for assistance.
Spring Seat Measurement refers to the measuring of your leaf springs from the center of one spring, across the axle to the center of the opposing spring. Getting assistance with this measurement from a friend is recommended. Refer to axle measuring video for assistance.
The Spring Seat Measurement is very important to ensure the safe and proper installation of this axle. If your Spring Seat measurement does not fall into the specified range, we cannot guarantee the successful installation or performance of your axle. Using a spring seat measurement that is too narrow will likely lead to your axle bending. Using a spring seat measurement that is too wide will lead to your tires rubbing on your trailer frame and/or leaf springs. Please verify that your Spring Seat Measurement falls into the range specified to avoid any problems.
How to Measure an Axle Video:
Trailer Axle Project Check List:
After searching local trailer dealerships I figured it would be best to skip the middle man and order my trailer need parts directly. Parts arrived on time and are top quality made in the U.S.A. Well except the bearings, they say made in China, I'm guessing most bearings are probably made in China so no biggie for me. The axle and wheel hubs are made in U.S.A. and are solid quality. Everything went together nicely. Very satisfied with the products ordered and price.
Reviewed by: Eric S. from Florida on 11/16/2020
A quality axle! Dexter spindle nut retainer cage is in the end plastic shipping cover. If buying axle, don’t forget UBolts, progressed hubs, lugnuts and dust covers. Recommend install tool for dust caps. Spindle nut cage snaps over the spindle nut, with flat part matching flat on spline.
Reviewed by: Jami from Cottonwood AZ on 1/2/2019
Competely replaced the axle, hubs, springs, u-bolts, etc on my marine trailer and upgraded with this item. It has and Easy Lube spindle which is even better than Bearing Buddies.
Reviewed by: Matt from Ojai, CA on 8/27/2018
Great axle, packaged well and shipped promptly, great seller-Thanks!!
Reviewed by: John Hornick from Northport,NY on 10/9/2017