You would need a replacement axle if you have noticed tread wear due to improper tire alignment, which is the result of a bent trailer spindle on one side. In addition, another common reason for axle damage results from over loading the trailer, which will result in noticing tread wear on the insides of both trailer tires. If you trailer experiences exposure to corrosive environments, such as a boat trailer, rust damage is another possible culprit for axle replacement.
This 2,000 lb Capacity Trailer Axle is made with 3/16" Steel Wall Thickness, measures 1 3/4" in diameter, and features #BT16 Spindles welded into the beam. This listing is for the Beam Only. This Axle is for trailers with a Leaf Spring Suspension. We offer all additionally needed components separately for you to build the exact axle kit that you are needing for your trailer.
The Tapered Spindle design of this 2,000 lb Axle has the following features:
Inner Bearing Surface: 1 1/16" ( Accommodates a 44649 Bearing Number)
Outer Bearing Surface: 1 1/16" ( Accommodates a 44649 Bearing Number)
Grease Seal: 1 1/2" Grease Seal Surface
This Listing is For a 66" Hub Face Axle that has Leaf Spring Seats welded at 55". This 66 inch Measurement is also referred to as the Track Measurement, or Center of Tire Measurement.
Specific Axle Specifications for this 2,000 lb Trailer Axle:
Hub Face: 66"
*Refers to the Outside Face of one Hub as it meets the wheel to the outside face of opposing hub as it meets the wheel
Overall Axle Length (Tip to Tip): 71"
*Refers to the tip of one side of axle spindle to the opposing tip
Camber: Not Cambered, Leaf Springs can be mounted on top of or underneath axle
Spring Seat Location: Spring Seats are welded at 55", this would mean that your Center of Leaf Spring Measurement would be 55".