20 inch Marine Coated Double Eye 3 Boat or Utility Trailer Leaf Spring 1850lb Capacity

Part Number: 26647

by NA: 26647

20 inch Marine Coat Double Eye 3 Leaf Spring

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Quantity	Price
1 - 4	$49.45
5	$35.01
6 - 7	$33.53
8 - 9	$32.97
10+	$32.42

Price $49.45

Quantity

In Stock

Description

This marine coated 20 inch Double Eye 3 Leaf Spring is rated to 1850 lbs per spring. This would bring a pair of these 20 inch Double Eye Trailer Springs to 3700 pounds, so these are commonly used on 3500 lb trailer axles. The marine coated finish provides extra protection against corrosion and the elements, so these springs are perfect for use on boat trailers or utility trailers traversing areas with a lot of salt or rain.

Spring Measurements and Specs:

Eye to Eye Measurement 20 inches (Free Length Measurement)

Does your spring measure slightly more than 20 inches, lets say 20 3/4 or so? You may have your trailer loaded, or the spring may be old and flattened out. It is not uncommon for leaf springs to measure longer than what the stock size is listed.

Free Arch Measurement (see picture) 3 1/2 inches

The free arch measurement is based off a stock, brand new spring. Your leaf spring will more than likely be flattened out, or possibly broken.

Spring measures 1 3/4 inches wide
9/16 inch bushings come installed in the spring, 1/2 inch are available as an add on for this leaf spring.

These springs can be used on both square tube or round tube trailer axles on boats or land trailers. The only difference is in the style of U-Bolt Required to mount the spring to the axle. Check the condition of your U-Bolts and the required size and check our U Bolt Kits out here. Leaf Spring U-Bolt Kits. Available in raw steel, hot-dipped galvanized, and stainless steel.

If you are planning on replacing the hangers, (brackets that are either welded or bolted to frame that hold leaf spring) and shackles (2 shackles towards rear of spring assembly for single per side or 4 in the middle for tandem trailer per side) We have single and double spring hanger kits available for Weld On assemblies that include all the necessary replacement hardware. Weld on assemblies are more common on non marine trailers.Spring Hangers

Boat trailers will commonly have bolt-on hangers or spring sliders.

20 inch Marine Coated Double Eye 3 Boat or Utility Trailer Leaf Spring 1850lb Capacity

Wholesale PRICING:PRICING:

Wholesale PRICING:
PRICING: