Free Shipping on Orders Over $200
Free Shipping on Orders Over $200
  1. Home
  2. Categories
  3. Trailer Suspension Parts
  4. Trailer Leaf Springs
20 inch Double Eye 3 Leaf Spring, Boat or Utility Trailer Spring 1850lb Capacity

20 inch Double Eye 3 Leaf Spring, Boat or Utility Trailer Spring 1850lb Capacity

Review(s)(13) Write a Review
Part Number: 24001
by NA: 24001
Get that Trailer back on the road! Huge Selection of Leaf Springs
Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

PRICING:

Quantity Price
1 - 4 $25.61
5 $17.68
6 - 7 $16.93
8 - 9 $16.65
10+ $16.39
Price $25.61
This 20 inch Double Eye 3 Leaf Spring is rated to carry 1850 lbs per spring. This would bring a pair of these 20 inch Double Eye Trailer Springs to 3700 pounds. These boat trailer or land trailer springs are common on 3500 lb trailer axles.
  
Spring Measurements and Specs:

Eye to Eye Measurement  20 1/8 inches (Free Length Measurement)

-Does your spring measure slightly more than 20 inches, lets say 20 3/4 or so? You may have your trailer loaded, or the spring may be old and flattened out. It is not uncommon for leaf springs to measure longer than what the stock size is listed. 
Free Arch Measurement (see picture) 3 1/2 inches
-The free arch measurement is based off a stock, brand new spring. Your leaf spring will more than likely be flattened out, or possibly broken. 
- Leaf Spring measures 1 3/4 inches wide and comes pre-installed with a 9/16 inch bushing. 1/2 inch bushings are available as an add on for this leaf spring if your leaf spring bolts are 1/2 inch in diameter.

These springs can be used on both square tube or round tube trailer axles on boats or land trailers. The only difference is in the style of U-Bolt Required to mount the spring to the axle. Check the condition of your U-Bolts and the required size and check our U Bolt Kits out here. Leaf Spring U-Bolt Kits. Available in raw steel, hot-dipped galvanized, and stainless steel. 

If you are planning on replacing the hangers, (brackets that are either welded or bolted to frame that hold leaf spring) and shackles (2 shackles towards rear of spring assembly for single per side or 4 in the middle for tandem trailer per side) We have single and double spring hanger kits available for Weld On assemblies that include all the necessary replacement hardware. Weld on assemblies are more common on non marine trailers.Spring Hangers
Boat trailers will commonly have bolt-on hangers or spring sliders. 

0 Items
$("#product_id").removeAttr("style"); $("#price").removeAttr("style")