10 inch Boat Trailer Bunk Bracket Hot Dipped Galvanized L-Type Float On Bunks

Review(s) (1) Write a Review

Part Number: 22652

by CE Smith Co.: 10162G

Corrosion Resitanet Heavy Duty Galvanized Bunk Bracket

Feature: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Add Ons

(1) Stainless Steel 1/2 x 3 x 4 5/16 U-Bolt [$9.49] (1) Galvanized 1/2 x 3 x 4 5/16 U-Bolt [$4.49]

$13.99

Quantity

In Stock

Description
Customer Reviews
Visit the Manufacture's Website:

This product is a 10 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 10 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 10 inch Hot-Dipped Galvanized bunk bracket is 1/4 inch. The foot holes are designed specially to be mounted on a 3 inch wide cross member. In most, if not all cases the cross-member would measure 3 inch by 3 inch. This style bunk bracket is used to mount bunk boards vertically to support the hull of the boat.

If you are deciding on this 10 inch L-Shape Galvanized Bunk Bracket you are either replacing existing rusted bunk brackets or switching the style of bunks on your boat trailer.

Choosing Hot-Dipped Galvanized L-Shape Bunk Brackets ensures a strong and sturdy corrosion resistant bunk bracket. Keep in mind that replacing bunk brackets typically also means you will be needing additional U-Bolts for mounting the new Bunk Brackets, and also bolts to re-bolt the bunk boards into the Bunk Brackets. These are both available on our website!

If you are mounting this 10 inch L Shape Bunk bracket to a 3 inch by 3 inch cross-member, the correct Hot-Dipped Galvanized U-Bolt is Galvanized U-Bolt 1/2 inch x 3 inch x 4 5/16 inch. This size U-Bolt will ensure the proper length of threads. Be sure to double check the U-Bolt dimension you require. These U-Bolts are also available in Stainless Steel and will NEVER RUST!

In addition, you will need through bolts to re-mount your bunk boards. Check the length bolt you need. We have these available in both Stainless Steel and Zinc plated, you will need a 1/2 inch diameter Trailer Bolts.

These bunk brackets typically are replaced in pairs, so keep that in mind!

L-Type Bunk Bracket Project Check List:

		Boat Trailer U-Bolts are used to mount your new Bunk Bracket to your trailers Cross Member, measure the height and width of your frame and select from Galvanized or Stainless Steel Trailer U Bolts in 1/2" Diameter.
		Trailer Bolts are used to go through the bolt holes in the Bunk Bracket, and through the Bunk Board to secure it in place. Use 1/2" Diameter Bolts and select the length needed. Available in Stainless Steel and Zinc Plated.
		Marine Bunk Board Carpet is used to wrap your boat trailers bunk boards to protect your boat hull from damage, available in several different widths for 2" x 4" and 2"x 6" boards.

Aluminum Boat Trailer Fender or Bunk Support 15 inch for Tandem Axle

Price: $12.99

In Stock

(0)

More Details

Aluminum Boat Trailer Bunk Bracket Replacement Swivel Top Angle

Price: $4.99

In Stock

(3)

More Details

Pontoon Boat Trailer Bunk Bracket Wing Style Galvanized

Price: $12.99

In Stock

(1)

More Details

Ultimate Aluminum and Stainless Steel Swivel Top Bunk Bracket - 10 inch 2x2 kit

Price: $59.99

In Stock

(1)

More Details

10 inch Boat Trailer Bunk Bracket Hot Dipped Galvanized L-Type Float On Bunks

Complete Your Project:

CUSTOMERS ALSO VIEWED